环氧地坪施工的流程和施工后的保养规则。环氧地坪施工的方案有很多种，但是大概的流程都是差不多的。今天就给大家分享一下环氧地坪施工的流程过程和施工后的保养都有哪些规则吧！首先我们来说说环氧地坪施工流程大概要经过哪几步？

The process of epoxy floor construction and the maintenance rules after construction. There are many construction schemes for epoxy flooring, but the process is almost the same. Today, let's share with you the process of epoxy floor construction and the rules of maintenance after construction. First of all, let's talk about the construction process of epoxy flooring, which steps should we go through? 

一、环氧地坪施工原料

I. Raw materials for epoxy floor construction

二、该环氧环氧地坪施工用途

II. Construction Use of the Epoxy Floor

三、施工基面：检查与准备

3. Construction Base Surface: Inspection and Preparedness

四、环氧环氧地坪施工的基本流程

4. Basic Process of Epoxy Floor Construction

再来说说环氧地坪施工后的保养规则都有哪些？

What are the maintenance rules of epoxy floor after construction?

1、地面如有粗硬砂粒、泥浆应及时扫除干净，以免砂粒碾磨地面，减少地面磨损。

1. If there are coarse and hard sand grains and mud on the ground, they should be cleaned in time to avoid grinding and reduce ground wear.

2、容易受到污染的区域，比较显眼的门面部位，走郎应每天用宽布拖把清洁1-2次。

2. In areas susceptible to contamination, more prominent facial areas should be cleaned 1-2 times a day with a wide cloth mop.

3、叉车、铲车卸货时注意货物平放，避免货物侧侄、拖拽刮伤地面。

3. When unloading forklift trucks and forklifts, attention should be paid to placing the cargo level, so as to avoid cargo side nephew and dragging scratch on the ground.

4、员工进入洁净区之前应换软底鞋；在容易带进砂粒、泥浆的交接处、出入口设置塑料毯，方便员工出入时清除鞋底杂物。

4. Employees should change their soft soles before entering the clean area. Plastic blankets should be installed at the junction where sand and mud are easily brought in and at the entrance and exit to facilitate the removal of sole debris when employees enter and exit.

5、车辆、叉车、铲车运行时尽量避免刹车。

5. Avoid braking when running vehicles, forklifts and forklifts.

6、机修工具尽量避免砸落地面。

6. Machine repair tools should avoid falling to the ground as far as possible.

7、如有大的漆膜破损，及时报修，以便在油污渗入基础之前进行修补作业。车间用水冲洗地面时，避免油水混合物沉积在深度破损处。

7. If the paint film is damaged, report it in time for repairing before the oil seeps into the foundation. When washing the floor with water in the workshop, avoid oil-water mixture depositing in deep damaged areas.

8、经常渗油漏油的部位，用锯末经常清洁，以免油份变性、吸附灰层，成为顽固性污渍。大面积油浸的区域，可用宽布拖把，推动锯末吸干地坪油份。

8. Sawdust is often used to clean the parts where oil often leaks, so as to avoid oil denaturation and dust adsorption, and become a stubborn stain. Wide cloth mops can be used to promote sawdust to absorb oil from the floor in large oil-immersed areas.